Telecommunications Contractor in San Jose, CA – Commercial and Industrial
Commercial telecommunications cabling contractor providing network cabling, structured cabling, fiber optic cabling, Wi-Fi installation, low-voltage communications wiring, voice, data and AV infrastructure.
Our crews pull Cat6 and Cat6A to every drop, build out MDF and IDF rooms, fusion-splice single-mode and multimode strands, and mount PoE wireless access points for every business across San Jose and Silicon Valley.
- California C-7 telecom license (CSLB #[NUMBER])
- TIA-568 certified testing
- Labeled ports & as-builts
Telecommunications Cabling Services in San Jose, CA
Our low voltage technicians install, label and test every cable themselves, following ANSI/TIA standards. Most projects combine two or three of these services in a single mobilization.
Network Cabling Installation
New drops, moves, adds and changes for copper Ethernet, terminated to keystone jacks and patch panels and certified to TIA-568.2-D.
Structured Cabling Installation
Telecom room design and buildout, from riser backbone cabling to rack mounting, dressing and cable management in every MDF and IDF.
Fiber Optic Cabling
Indoor, outdoor and riser-rated glass cable installed, fusion spliced, terminated to LC and SC connectors, and certified with OTDR traces.
Commercial Wi-Fi Installation
Predictive and on-site surveys, access point mounting, dedicated PoE drops and wireless coverage validation for offices and warehouses.
Voice & Communications
Cabling and device setup for VoIP desk phones, overhead paging zones and door or lobby intercom systems.
Security System Cabling
Home-run PoE cabling for IP cameras, card readers, door contacts, electrified hardware and other low-voltage systems, routed to secured IDF locations.
AV & Conference Room Cabling
Display, camera and microphone cabling for boardrooms, huddle rooms and training spaces, with floor boxes, wall plates and HDBaseT runs coordinated with your AV integrator.
Telecommunications Infrastructure We Install in San Jose
Every component below is installed, terminated and documented by our own crews.
- Cat6
- Cat6A
- Single-Mode & Multimode
- Ethernet
- PoE
- Patch Panels
- Equipment Racks
- MDF
- IDF
- Wireless Access Points
- VoIP
- Paging
- Intercom
- IP Cameras
- Access Control
- AV
| Media | Bandwidth / speed | Max distance | Typical use |
|---|---|---|---|
| Cat6 U/UTP | 250 MHz; 1 Gbps (10 Gbps to 55 m) | 100 m channel | Workstations, phones, printers |
| Cat6A U/UTP or F/UTP | 500 MHz; 10 Gbps | 100 m channel | Wi-Fi 6/6E/7 access points, PoE cameras |
| OM4 multimode | 850 nm; 10 Gbps | 400 m (10GBASE-SR) | MDF-to-IDF riser backbone |
| OS2 single-mode | 1310 / 1550 nm; 10–100+ Gbps | 10 km+ at 10 Gbps | Campus and building-to-building links |
| PoE (IEEE 802.3bt) | Up to 90 W at the switch | 100 m channel | Access points, PTZ cameras, displays |
Telecommunications Cabling for San Jose Commercial Facilities
Each building type brings different pathways, codes and schedules. We plan the installation around how your space operates.
- OfficesTenant improvements, suite moves and open-plan rewires with workstation and conference room drops.
- WarehousesHigh-bay access point mounting, scanner coverage and backbone runs to remote IDFs.
- SchoolsClassroom Wi-Fi, paging, intercom and camera cabling scheduled around the academic calendar.
- Medical FacilitiesPlenum-rated cabling and phased work that keeps patient areas open.
- RetailPOS, guest Wi-Fi, digital signage and camera drops installed after hours.
- Industrial FacilitiesShielded and armored cable for production floors, plus single-mode links between buildings.
- Commercial BuildingsRiser backbones, carrier demarc extensions and base-building equipment rooms.
Where Our Low Voltage Crews Work
North First Street & Zanker Road
R&D tech campuses
R&D buildings here change tenants often. We rewire labs and engineering floors with Cat6A and OM4 trunks and build new IDFs on each floor.
Downtown & Diridon Station area
Downtown office high-rises
We run riser backbones from the building MDF to tenant IDFs and coordinate night and weekend work with building engineering and freight elevators.
Hellyer Avenue & Great Oaks Boulevard
Data center and industrial sites
Single-mode cross-connects, overhead ladder rack and high-density trunks with full OTDR documentation.
Santana Row & Stevens Creek Boulevard
Flagship retail and restaurants
POS, guest Wi-Fi, signage and camera cabling completed inside landlord work windows, ahead of a fixed opening date.
Problems We Solve for San Jose IT Managers
Most cabling calls start with a specific headache. These are the ones we fix most often.
A telecom room nobody can trace
We remove abandoned cable, re-terminate to new patch panels and label each port to a floor plan your team can use.
Wi-Fi dead zones and dropped calls
Weak coverage is often an access point placement or cabling issue. We relocate and add AP drops to match how the space is used.
Cameras and APs that reboot
Undersized cable and long runs starve PoE devices. We replace failing links with Cat6A and confirm power budgets.
A move-in date that can’t slip
We schedule pathways, pulls and testing around your builder so every drop is live on day one.
No records from the last vendor
Every project ends with as-built drawings, test reports and a port map for whoever manages the cabling next.
Too many low-voltage vendors
Copper, single-mode, voice, security and AV cabling from one company means one schedule and one point of contact.
Our San Jose Telecommunications Cabling Installation Process
The same six steps on every job, whether it’s ten drops or a full building.
Site survey
We walk the space, measure runs, inspect pathways and equipment rooms, and note ceiling and fire-rating conditions.
Design and itemized quote
You receive a drop map, rack elevation and itemized quote covering cable, labor and schedule.
Pathways and racks
We install J-hooks, sleeves, ladder rack and firestopping, then mount and ground racks in the MDF and IDFs.
Pulling and terminating
Copper and glass are pulled, dressed and terminated to T568B jacks, patch panels and splice enclosures.
Testing and labeling
Every link is certified and labeled at both ends to TIA-606, and any failure is fixed before sign-off.
Handoff and documentation
We deliver test reports, as-builts and port maps, then patch in switches with your IT team.
Telecommunications Cabling Testing & Certification in San Jose
Installed cable is only finished when it’s tested. We certify copper to TIA-568.2-D with a Fluke-class tester and glass strands to TIA-568.3-D with loss testing and OTDR.
You receive a pass/fail report for every port and strand, which also supports manufacturer extended warranties where they apply.
| Test | Applies to | Standard | What it confirms |
|---|---|---|---|
| Wire map | Cat6 / Cat6A | TIA-568.2-D | Correct T568B pin order, no splits, shorts or opens |
| Length | Cat6 / Cat6A | TIA-568.2-D | Permanent link ≤ 90 m, channel ≤ 100 m |
| Insertion loss, NEXT, return loss | Cat6 / Cat6A | TIA-568.2-D | Link supports its rated 1 or 10 Gbps |
| Optical loss (Tier 1) | Single-mode, multimode | TIA-568.3-D | Loss within budget; mated pairs ≤ 0.75 dB |
| OTDR trace (Tier 2) | Backbone strands | TIA-568.3-D | Location and loss of every splice and connector |
| Labeling audit | All media | TIA-606-C | Both ends labeled and matched to as-builts |
Telecommunications Contractor Service Area in San Jose
Our office on East Brokaw Road sits near Highway 101 and I-880, minutes from North First Street, Downtown, Willow Glen, Berryessa, Evergreen, Almaden and the Westgate area.
We also serve these 10 neighboring cities:
Request a San Jose Telecommunications Cabling Quote
Send your floor plan, drop count or a short description of the project. We’ll schedule a site walk and return an itemized quote for the cabling, racks, splicing and testing involved.
C-7 Telecom License & Contact Details
San Jose Telecom Techs97 E Brokaw Rd, San Jose, CA 95112
Email: [email protected]
What to include in your request
- Number of drops, APs or cameras and their locations
- Floor plan or photos of the MDF, IDF and ceilings
- Cable type, if known (Cat6, Cat6A, single-mode or multimode)
- Building address and site hours
- Target completion or move-in date